"КОМПАНИЯ САНРАЙЗ" - маслопрессы, жаровни, маслофильтры, котлы твердотопливные, дробилки молотковые, сушилки для семян...

ПП "КОМПАНІЯ САНРАЙЗ"
Україна, м. Харків, вул. Ковтуна,52
тел: +38 (067) 7318107 +38 (067) 7857161
факс: +38 (067) 2369589
Конструирование, изготовление и ремонт оборудования для переработки масличных культур

For more than 10 years our experts have been designing and manufacturing equipment to obtain vegetable oil by a pressing method. Using the modern and "know-how" technologies in oil processing, the experts of SUNRISE have designed and put into production a new generation of presses for preliminary and final pressing on cold, hot, husking and non-husking technologies on the seeds processing of oil-bearing cultures and fodder by-products. Our first designs were the oil presses of the MP-500 (МП-500), MP-1000 (МП-1000), FPM (ФПМ), EPM (ЕПМ). Our screw oil presses can process any kinds of oil-bearing cultures and have the productivity of 100-2000 kg per hour. In our oil presses the residual oil content of oilcake is 4-7%.

Our vegetable oil presses have some parameters alike the oil presses MP-68 (МП-68), EP (ЕП), FARMET, CIMBRIA etc., some parameters of our oil presses excel them. Due to modern equipment and current technologies, the prices of our oil presses is lower than our competitors do. Our oil presses can operate in the twofold regime of pressing as well as in the regime of final pressing. They are designed in such a way that it allows to change wearing parts without disassembling their body, which is designed to have an easy access. The oil presses of premium class have electronic device to control pressing and an automatic system to withdraw ballast residue.

We can make individual changes of any oil press design to mount it in any room.

Buyers receive all the information on technology to process oil-bearing cultures. Experts advice clients when choosing main and additional equipment.

A small-sized company can have a space-saving oil press with the productivity of 100 to 400 kg/hour. We designed oil presses that can operate on "cold" processing technology. The equipment allows to obtain the highest quality paying minimum price. SUNRISE has its own research and development department and pilot production of vegetable oil. It is a significant factor to adapt our oil presses to the needs of our customers. We can propose a wide range of services: machines to press oil-bearing cultures, equipment to refine vegetable oil, turnkey installation etc.

Forepresses are used for preliminary pressure of oil-yielding crops when using two-phase pressing. The company SUNRISE produces forepresses having productivity 100 - 2000 kg/hour. The forepresses are reliable in operation and can pressure oil without heating raw materials or under low temperature. The forpresses of cold pressing are single-screw presses having a vertical split-face loose pressing cage. The press is driven by a three-phase current motor through a cylindrical or planetary drive. The distributor already makes the prepressing of the raw material in the vertical input hole. It contributes to the complete optimal filling of a pressing cage. The horizontal feed screw provides the even regulated supply of raw materials into the press. The rapidly wearing parts of a horizontal press duct are armored. The screw shaft rests upon one or two points on the bed plate of a press.

Expellers are used for final pressure of oil from oilcake, which is obtained after having been pressed in a forepress. SUNRISE manufactures expellers that have the productivity up to 800 kg/hour (on sunflower seeds). The SUNRISE presses of final pressing process fodder by-products obtaining 6% of oil in addition.

The expellers we produce are made as a single-screw press having a vertical split-face loose pressing cage. The press is driven by a three-phase current motor through a cylindrical or low-noise planetary drive. The distributor already prepresses the raw material in the vertical input hole. It contributes to the complete optimal filling of a pressing cage. The feed screw provides the even regulated supply of raw materials into the press. The rapidly wearing parts of a horizontal press duct are armored. The screw shaft rests upon one or two points on the bed plate of a press.

At present the processing of rape is of primary importance. Our experts have studied the rape processing technology and designed our own equipment. The oil press is made as a single-support screw press having a vertical split-face loose pressing cage. The press is driven by a three-phase current motor through a cylindrical or low-noise planetary drive. Our press to process rape has a high index of oil output and it needs no additional equipment.

Category:

Oil presses

Forepresses
Forepresses

Forepresses are used for preliminary pressure of oil-yielding crops when using two-phase pressing. The company SUNRISE produces forepresses having productivity 100 - 2000 kg/hour. The forepresses are reliable in operation and can pressure oil without heating raw materials or under low temperature. The forpresses of cold pressing are si...

Read more: Forepresses

Category:

Oil presses

Expellers
Expellers

Expellers are used for final pressure of oil from oilcake, which is obtained after having been pressed in a forepress. SUNRISE manufactures expellers that have the productivity up to 800 kg/hour (on sunflower seeds). The SUNRISE presses of final pressing process fodder by-products obtaining 6% of oil in addition. The expelle...

Read more: Expellers

Category:

Oil presses

Rape processing press
Rape processing press

At present the processing of rape is of primary importance. Our experts have studied the rape processing technology and designed our own equipment. The oil press is made as a single-support screw press having a vertical split-face loose pressing cage. The press is driven by a three-phase current motor through a cylindrical or low-noise...

Read more: Rape processing press